ZERO POINT CLAMPING SYSTEM
With our Zero point clamping system
Set-up time savings by optimizing clamping system, fixture and workpiece changes in production with the GRESSEL zero point grid system plates.
Flat allround plate with total height 30 mm made of stainless steel - vacuum hardened HRC 52-54
1 solid locating pin
Precise and strong - repeatability < 0.01 mm and 20 kN feed force per module
Mounting on machine tables T-slot distance 63, 80, 100 and 125 mm
Fitting holes at a distance of 50 mm for fitting screws
Mechanical clamping with 30 Nm
Clearances for easy cleaning and high tilt rigidity
Advantages that will
✓ Flat Machine Table Allround Plates
Total height 30 ± 0.015 mm
Stainless and hardened steel plates
✓ Precise and strong
Repeatability < 0.01 mm
Pull-in force per module 20 kN
✓ Flexible mounting on the machine table
Mounting bolts mountable from above and below
✓ Zero point clamping system and grid plate in one
hardened fitting bushes with 50 mm pitch
Clearance for easy cleaning
✓ Mechanical tension
all modules can be operated from the front
Zero point clamping system gredoc nrs
Whether from centric or up to high-precision clamping systems and in a variety you have never seen before – that is our C2 product family. With the C2, you will always find exactly the right clamping device for your task thanks to our modular system. GUARANTEED!
The gredoc NRS plates are designed for stationary mounting on machine tables of vertical and horizontal machining centers and pallet automations.
Standard application with 2 locating pins
Two or more gredoc locating bolts with 200 mm pitch mounted directly in the components to be clamped.
Single palletizing with gredoc round and workpiece direct clamping
1 pc. gredoc locating bolt
2 pcs. gredoc indexing bolts mounted in the components to be clamped.
Pull-in and holding forces
of the gredoc Modules
|Max. Anzugs-Drehmoment||Max. Anzugs-Drehmoment|
|Nullpunkt-Spannsystem gredoc NRS||30 Nm||20 kN|
Retaining force locating pin
M12 Screw = 65 kN
M10 Screw= 45 kN