5-axis centric clamping vise C5X
Your benefits
5-axis centric clamping vise C5X
the new standard for modern 5-axis machining
The GRESSEL C5X centric clamp was specially developed for the requirements of modern 5-axis CNC machining. Thanks to its compact design, high clamping force and optimum accessibility, the C5X is the first choice for all 5-axis machines with and without pallet automation.
All GRESSEL 2.0 system jaws from the large clamping technology modular system can be used on the C5X centre clamp, allowing the 5-axis clamps to be individually adapted to your machining task. Special advantages are the fast adjustability of the clamping range with the large basic clamping stroke of 120 mm. A new quick-change spindle system also enables fast conversion to larger or smaller clamping ranges.
Jaw program
Quick spindle change
Best accessibility
Large basic clamping stroke
Large jaw construction kit
Jaw change with just two screws
Quick-change system for spindle
5-axis machining (OP10)
High clamping force
3 different heights (H-142 mm, H-181 mm, H-252 mm)
5 different lengths (L-320 mm, L-400 mm, L-500 mm,
L-600 mm, L-800 mm)
Advantages that will
will inspire you
✓ Best accessibility
High support jaws and symmetrical design enable collision-free machining from all sides – without the need for a console.
✓ Modular design
Three heights (142 / 181 / 252 mm) and up to five base body lengths (up to 800 mm) – for maximum flexibility and customisable clamping ranges.
✓ Quick jaw change
Changed in seconds with two screws
✓ Up to 40 kN clamping force. Flexible. Precise. Safe. Accurately repeatable.
✓ Quick spindle change & extension
The clamping range can be changed flexibly and easily using the simple quick spindle change system.
Our Designs
5-axis centric clamping vise C5X
Important data at a glance
| Baugrösse | Spannkraft | Masse (Grundkörper) | Gewicht |
|---|---|---|---|
| C5X-S L-320 mm | 0 – 40 kN | 320 x 125 x 142 mm | 26.1 kg |
| C5X-M L-320 mm | 0 – 40 kN | 320 x 125 x 181 mm | 32 kg |
| C5X-L L-320 mm | 0 – 40 kN | 320 x 125 x 252 mm | 42.6 |
| C5X-S L-400 mm | 0 – 40 kN | 400 x 125 x 142 mm | 29 kg |
| C5X-M L-400 mm | 0 – 40 kN | 400 x 125 x 181 mm | 35 kg |
| C5X-L L-400 mm | 0 – 40 kN | 400 x 125 x 252 mm | 45.5 kg |
| C5X-S L-500 mm | 0 – 40 kN | 500 x 125 x 142 mm | 32.5 kg |
| C5X-M L-500 mm | 0 – 40 kN | 500 x 125 x 181mm | 38.5 kg |
| C5X-L L-500 mm | 0 – 40 kN | 500 x 125 x 252 mm | 49 kg |
| C5X-S L-600 mm | 0 – 40 kN | 600 x 125 x 142 mm | 36 kg |
| C5X-M L-600 mm | 0 – 40 kN | 600 x 125 x 181 mm | 42 kg |
| C5X-L L-600 mm | 0 – 40 kN | 600 x 125 x 252 mm | 52.5 kg |
| C5X-S L-800 mm | 0 – 40 kN | 800 x 125 x 142 mm | 43.2 kg |
| C5X-M L-800 mm | 0 – 40 kN | 800 x 125 x 181 mm | 49.1 kg |
| C5X-L L-800 mm | 0 – 40 kN | 800 x 125 x 252 mm | 59.7 kg |
- 2 years warranty
- 5 sides machining
- Construction kit from GRESSEL C2.0
Three clamping options
The right clamping vise
for your tasks
The C5X 5-axis centric clamping vise comes with standardised fastening variants for machine mounting already integrated. Additional positioning and fastening holes can be customised on request
Clamping with 2 fitting screws
Ø12f7/M12 and clamping screws
Alignment through precision sliding blocks
20H7 in the base body in the T-slot of the machine table. Clamping with clamping claws
Alignment and clamping
with zero-point clamping system GRESSEL gredoc
(2-3 locating pins and SCHUNK VERO-S (2-3 locating pins))
Optional: Positioning and mounting holes on customer request
Gressel 5-axis centric clamping vise C5X in use
