Zero point clamping system
gre4doc
Your benefits
With our zero point clamping system gre4doc
Mechanical zero point clamping system gre4doc integrated in pyramids, tombstones and consoles. It is clamped mechanically with 4 mounting bolts and a 52 x 52 mm gauge.
Quick and easy retooling of the clamping devices
with 52 x 52 mm pitch per clamping device
for the pyramids, tombstones and consoles
Zero point clamping system integrated
Mechanical clamping
For GRESSEL clamping vises
Only one clamping screw
Multiple clamping options
Advantages that will
will inspire you
✓ Quick, tilt-free and precise set-up
Quick and easy replacement
No tilting
repeat accuracy < 0.005 mm
✓ Integrated gre4doc zero-point clamping system
Weight saving
Cost effective
Fewer interfering contours
✓ Stitch dimension gre4doc
52 mm distance between clamping bolts
Compatible with other manufacturers
✓ Mechanical clamping
1 clamping screw for 4 locating bolts
Pull-in force 15 kN
Tightening torque 30 Nm
Our Designs
- 2 years warranty
- Stitch size 52 x 52 mm
- Integrated zero point clamping system
Zero point clamping system gre4doc
Easy handling and short set-up times
The locating pins are pressed into the precisely fitting half sleeves by the clamping plungers. The locating pins are thus positioned accurately in the X / Y direction. At the same time, the locating bolts are pulled down by the accurately shaped retraction slope.
1 Spindle | 2 Clamping plunger | 3 Locating hole 52 x 52 mm
Gressel zero point clamping system gre4doc in use
