Zero point clamping system
gredoc
Your benefits
With our Zero point clamping system gredoc
Flat and with an overall height of only 30 mm, mechanical zero point clamping system with a solid locating pin and high pull-in force of 20 kN per locating pin. Clamping is mechanical in four versions, 1-fold module round and angular, 2-fold and 3-fold module angular.
Flat zero point clamping system height 30 mm
Solid locating pin ᴓ40h6/ᴓ25h6
Precise and strong - repeatability < 0.01 mm and pull-in force 20 kN
Multiple options for machine table mounting
Anti-rotation 2x 90⁰ with only 1 locating bolt
Mechanical clamping - no air or hydraulic connection necessary
Clearances for easy cleaning and high rigidity
Advantages that will
will inspire you
✓ Fast, precise and tilt-free set-up
Simple and quick set-up
No risk of tilting
Highest repeat accuracy < 0.01 mm
✓ Flat zero-point clamping system
Insensitive to chips and cooling lubricants
Clearances for easy cleaning, higher tilting rigidity
✓ Solid mounting bolt
Mounting bolt can be mounted from above and below
Stud centering Ø25 H7, compatible with the leading zero-point clamping systems
Our Designs
- 2 years warranty
- Stainless mechanical versions
- Total height only 30mm
Zero point clamping system gredoc
Low, precise and cost-effective
The locating pin is pressed into the precisely shaped half-shell (polygon) using the clamping pin and is thus precisely aligned in the X and Y directions. At the same time, the retraction bevel pulls the locating bolt downwards with a force of 20 kN.
1 Clamping screw | 2 Clamping bolt| 3 Locating hole
Gressel Zero point clamping system gredoc in action
