Long stroke vise
CLH
Your benefits
with our
Long stroke vise clh
The hydraulic, centric long stroke vise from GRESSEL with integrated stroke measurement enables a high degree of flexibility thanks to the large clamping stroke of 110 mm, universal jaw interface and flexible jaw screw connection. Hydraulic and pneumatic integration is carried out individually via the side connections or via the bottom connection. (see GRESSEL “Automation” catalog).
Depending on customer requirements and application, the long stroke vise can be equipped with or without a stroke measuring system and pneumatic media transfer for sealing air (dynamic pressure sensing).
Individual clamping solutions are possible with the GRESSEL long stroke vise, whether for single part production or in an automated process. Contact us, we will find the right clamping solution for you and configure the clamp according to your requirements.
Customer benefits:
- Hydraulic centric clamping stroke 110 mm
- Clamping range 20 – 345 mm with standard jaws
- 40 kN clamping force at 230 bar (80 kN total clamping force)
- Operating pressure 10 – 230 bar
- Base-side connection plate, machine- or substructure-specific design
- Pneumatic interface in the sliders
- Electrical sensor monitoring on the slides possible
- IO-Link interface: read out the displacement measurement system, easy integration into automation
systems
VERO-S / gredoc interface, 200 mm pitch
Long slides with optimal
screw connection options for jaws
Jaw interface suitable for
Jaw program C2.0
Hydraulic side connections (open, close)
Pneumatic media transfer in the clamping slide
Variant with electrical interface for reading out the IO-Link position measuring system available
Advantages that will
will inspire you
✓ VERO-S / gredoc interface, 200 mm pitch
✓ Long slides with optimal
screw connection options for jaws
✓ Jaw interface suitable for
Jaw program C2.0
✓ Hydraulic side connections (open, close)
✓ Pneumatic media transfer in the clamping slide
✓ Variant with electrical interface for reading out the IO-Link position measuring system available
Our versions - System jaws
Long stroke vise CLH
Important data at a glance
| Size | Description | Size (base body) | Maximum clamping range | Weight | Order no. |
|---|---|---|---|---|---|
| CLH 125 | Hydraulic large lifting clamp standard L-360 mm, incl. stroke measurement, pneumatic media transfer and spring contact interface | 125 x 360 x 110 mm | 0 – 360 mm | 29 kg | CLH.125.001.01 |
| CLH 125 | Hydraulic large lifting clamp with cable L-360 mm, incl. stroke measurement, pneumatic media transfer and cable-connected interface | 125 x 360 x 110 mm | 0 – 360 mm | 29 kg | CLH.125.002.01 |
| CLH 125 | OMOP L-360 mm large hydraulic lifting clamp, without travel measurement and without pneumatic media transfer | 125 x 360 x 110 mm | 0 – 360 mm | 29 kg | CLH.125.003.01 |
| CLH 125 | GRESSEL hydraulic sub-base | 97 x 91 x 7.5 mm | 0.5 kg | CLH.125.020.01 | |
| CLH 125 | Customised hydraulic connection plate (dummy article for quotation phase) | 97 x 91 x 7.5 mm | 0.5 kg | CLH.199.020.01 |
- 2 years warranty
- Clamping stroke 110 mm
- Hydraulic centric vise
Three clamping options
The right clamping vise
for your tasks
The CLH offers the following options for mounting on the machine table integrated in the long stroke clamp.
Optional: Positioning and mounting holes on customer request.
Clamping with 4 screws
Fastening from above via 4x M12 screws and positionable via Ø12 zylinder pins
Alignment and clamping
With zero-point clamping system GRESSEL gredoc or SCHUNK VERO-S
Optional: Positioning and mounting holes on customer request
Flexible connection plate
Machine- or substructure-specific design
Electrical interface
Spring contact Interface for reading out the IO-Link position measuring system
Gressel long stroke vise CLH in action
