single clamping vise
Your benefits
With our
single clamping vise SC2.0
The SC2.0 single clamping vise is the ideal addition for very precise finished part processing with its fixed jaw. In combination with the C2.0 centric clamp, it is ideal for use on tombstones, pallets or pyramids. The fixed jaw enables very high angular accuracy to be achieved when machining finished parts.
Customer benefits:
- High angular accuracy (fixed jaw) and repeat accuracy
- Ideal for OP10 and OP20 machining in combination with the centric clamping vise C2.0
- Same base body as the C2.0, ideal for automation on pallets and tombstones
- Low maintenance, the SC2.0 can be cleaned in seconds
- Nickel-plated base body for optimum corrosion protection
- Cross slot for fixed jaw, workpiece contact with fixed jaw
- Wide range of jaws, movable jaws from the C2.0 modular system
Closed and protected spindle
Compact design
High clamping force and large clamping range
High accuracy - repeatability ± 0.01 (C2.0 80 + 125) and ± 0.015 (C2.0 160)
Jaw change with only 2 screws - easy jaw interface for own jaws
Ball bearing spindle - Backlash free
1 + 2. side machining possible
Advantages that will
will inspire you
✓ Closed system
Protection against contamination, insensitive to chips and high functional reliability
✓ High clamping force and large clamping range
25 kN (80) / 35 kN (125) / 50 kN (160)
Clamping range up to 448 mm
✓ High accuracy
Repeat accuracy +/- 0.01 (80+125) / +/-0.015 (160)
Angular accuracy +/-0.01 (80 + 125) / +/-0.015 (160)
✓ Quick jaw change with just 2 screws
Quick conversion to large span width, simple jaw interface = own jaw production possible
✓ Scale / scaling – Help for positioning the system jaws and the workpiece
✓ Long service life –
The base body of the SC2.0 is nickel-plated
Our Designs
Single clamping vise SC2.0
Important data at a glance
| Size | Clamping force | Dimension (base body) | Maximum clamping range | Weight |
|---|---|---|---|---|
| SC2.0 80 L-130 | 0 – 25 kN | 130 x 80 x 50 mm | 0 – 111 mm | 2.9 kg |
| SC2.0 80 L-190 | 0 – 25 kN | 190 x 80 x 50 mm | 0 – 171 mm | 4.4 kg |
| SC2.0 125 L-160 | 0 – 35 kN | 160 x 125 x 50 mm | 0 – 141 mm | 6.4 kg |
| SC2.0 125 L-235 | 0 – 35 kN | 235 x 125 x 50 mm | 0 – 211 mm | 9.3 kg |
| SC2.0 125 L-300 | 0 – 35 kN | 300 x 125 x 50 mm | 0 – 281 mm | 11.8 kg |
| SC2.0 160 L-280 | 0 – 50 kN | 280 x 125 x 70 mm | 0 – 245 mm | 21 kg |
| SC2.0 160 L-480 | 0 – 50 kN | 480 x 125 x 70 mm | 0 – 448 mm | 35 kg |
- 2 years warranty
- highest precision
- Proven GRESSEL quality
Three clamping options
The right clamping vise
for your tasks
The SC2.0 offers the following mounting options integrated into the single clamp on the machine table. Optional: positioning and mounting holes on customer request.
Clamping with 2 fitting screws
All variants with precision holes ᴓ12JS for exact positioning, fastening from above through the base body
Alignment using precision sliding blocks
Longer variants are fastened with clamping claws, some variants with zero-point bolt mounting for 52 x 52 and 96 x 96 mm
Alignment and clamping
with zero-point clamping system GRESSEL gredoc
(1-3 mounting bolts)
Optional: Positioning and mounting holes on customer request
Gressel single clamping vise SC2.0 in use
