Zero point clamping system
gredoc NRS
Your benefits

With our Zero point clamping system
gredoc nrs
Set-up time savings by optimizing clamping system, fixture and workpiecechanges in production with the GRESSEL zero point grid system plates.







Flat allround plate with total height 30 mm made of stainless steel - vacuum hardened HRC 52-54
1 solid locating pin
Precise and strong - repeatability < 0.01 mm and 20 kN feed force per module
Mounting on machine tables T-slot distance 63, 80, 100 and 125 mm
Fitting holes at a distance of 50 mm for fitting screws
Mechanical clamping with 30 Nm
Clearances for easy cleaning and high tilt rigidity
Advantages that will
inspire you
✓ Flat Machine Table Allround Plates
Total height 30 ± 0.015 mm
Stainless and hardened steel plates
✓ Precise and strong
Repeatability < 0.01 mm
Pull-in force per module 20 kN
✓ Flexible mounting on the machine table
Mounting bolts mountable from above and below
✓ Zero point clamping system and grid plate in one
hardened fitting bushes with 50 mm pitch
Clearance for easy cleaning
✓ Mechanical tension
all modules can be operated from the front

Our Designs

Ø280 mm
Tensioning tower solinos 40-4V
Zero point clamping system gredoc NRS

Technical
Information
Whether from centric or up to high-precision clamping systems and in a variety you have not seen before – this is our C2.0 product family. With the C2.0 you will always find exactly the right clamping device for your task thanks to our modular system. GUARANTEED!
Concept
The gredoc NRS plates are designed for stationary mounting on machine tables of vertical and horizontal machining centers and pallet automations.

Standard application with 2 locating pins
Two or more gredoc locating bolts with 200 mm pitch mounted directly in the components to be clamped.

Single palletizing withgredoc round and workpiece direct clamping
1 pc. gredoc locating bolt
2 pcs. gredoc indexing bolts mounted in the components to be clamped.
- 2 years warranty
- Stainless steel plates
- Proven GRESSEL quality
Pull-in and holding forces
of the gredoc Modules
Max. Anzugs-Drehmoment | Max. Anzugs-Drehmoment | |
---|---|---|
Nullpunkt-Spannsystem gredoc NRS | 30 Nm | 20 kN |
Retaining force locating pin
M12 Screw = 65 kN
M10 Screw= 45 kN

Gressel Zero point clamping system gredoc NRS in action










