Are you planning an innovative pallet automation system, but are you bothered by this mix of first & second side clamps, which come from several manufacturers and are therefore different systems?
This was exactly the situation faced by our good customer from Lower Bavaria; the Teisnach plant of the Munich-based technology group Rohde und Schwarz.
An automation system was purchased here, the heart of which is a Liebherr PHS 1500 Allround. This automation is used to load Heller horizontal machines. The concept of pure OP10 clamps, as well as separately selected OP20 clamps, was actually as good as finished here. However, we were able to fully convince the customer with our C2 basic clamping program! The mix of high-precision C2 centric clamps and matching S2 fixed jaw clamps came at the right time. Everything from one source and also very flexible! As a finishing touch, special base jaws matched by the customer were also supplied – and the basis was perfect. The interior of the machine was ideally matched to the components by means of the customer’s own, very well thought-out pyramids.
Our sales engineer Sokha Hem with Paul Hauner (project manager – picture left) and Georg Kauschinger (head of “Milling Horizontal” – picture right) in front of the automation system.
Here the well thought-out pyramids equipped with C2 and S2.
To enable subsequent automation of the clamps, all sizes have been equipped with standardized clamping wrench widths at the actuation interface.
Multi clamping with optimum accessibility
Your contact:
Sokha Hem,
Sales Engineer
GER Süd, AT, CZ, SK, PL, CR, GB
sokha.hem[at]gressel.ch
Our sales engineers are also near you!
